
If you’re a Pit Boss owner, you know that your smoker is one of the most important pieces of equipment in your BBQ arsenal. So, when something goes wrong with it, it can be disastrous. Fortunately, some easy troubleshooting tips can help get your smoker up and running again.
In this blog post, we’ll share some common Pit Boss problems and how to fix pit boss err code. Whether you’re having trouble getting started or your smoker isn’t working correctly, these tips will help get things back on track.
How Does A Pit boss Pellet Grill Work?
Pellet grills work by using an auger motor to feed pellets into the fire pot where they are heated and burned. Then, a fan distributes the heat and smoke from the burning pellets to the cooking area.
The auger motor feeds the pellets into the burn pot until the temperature reaches a certain point (measured by an internal thermostat inside the grill). Once this happens, the control panel will tell the auger to slow down the feeding process or stop it altogether.
This feature is great for keeping the fire hot and ensuring the grill doesn’t get too hot when it’s on. It also helps to prevent flare-ups and grease fires which are more of a risk on a pellet grill than a gas grill.
Another great feature of a pit boss pellet grill is its P setting, which gives you greater control over how often your auger cycles. The higher the P setting, the less frequent the pause between each auger feeding cycle.
The P setting is similar to the fuel adjustment needles in a car’s carburetor. When you set the P setting to a lower number, the auger will feed the pellets more frequently and you can increase the pause between each cycle when you want to keep your grill at a higher temperature or to allow for a longer time in the fire box.
Why Is My Pit boss Not Smoking?
If your Pit Boss pellet grill is not smoking, there are a few things that you can try. First, you should make sure that the smoker is on the right setting.
Second, you should also check the pellets. Wood pellets produce more smoke if they are fresh and dry. If they are damp, you won’t see much smoke at all.
Finally, you should clean the firepot. This may seem like a hassle but it will save you time and money in the long run.
It’s important to clear out the pellet cup and ash cup every so often. A buildup of ash can cause the igniter to be blocked by a thick bed of ash, which will inhibit the smoke production.
When the ash is cleared out, the wood pellets will ignite much easier and your meat will be cooked more quickly. You can use a shop vacuum or handheld vacuum to remove the ashes, which will help you get a better smoke flavor.
You may have to try a few different wood pellets before you find the ones that work best on your smoker. The right mix of pellets can give your Pit Boss smoker a smoky taste you’ll love.
If you are still having trouble, you may need to call in the pros. There are several options for fixing your Pit Boss smoker, including replacing the control panel and fuses.
Pit boss Fan Not Working

If you have a Pit boss pellet grill, it will not run properly without a working fan. This is because the fan is important in maintaining the temperature and airflow throughout the cooking chamber.
A working fan will make sure your food is cooked evenly and taste tastier. It also helps prevent smoke from forming in the smoker.
You may have a problem with the fan connection, which means you’ll need to check this connection before you can fix the issue. You can do this by examining the yellow wires that connect to the fan.
Some of them can get stuck or twisted up, and they can cause the fan to stop turning. If this is the case, it’s a simple job to loosen these and remove the Molex connector.
Another possibility is that the fan has a problem with its motor. This could be caused by a jam in the motor, a block that doesn’t deliver power or a broken motor.
This is a fairly common issue and can be fixed by replacing the fan. You can purchase a replacement from the Pit Boss website.
Alternatively, you can take your grill to a Pit Boss repair technician to determine the cause of the issue. Sometimes, a simple change of the fan can fix the problem, but other times, the issue will require the control board to be replaced.
What Does ErL Mean On A Pit boss Smoker?

The erl code is a common error on Pit boss smokers. It can be caused by many different issues and isn’t always easy to fix.
A Pit Boss smoker uses a temperature probe that is located near the back wall of the grill. The probe monitors the temperature inside the cooking chamber and sends a signal to the controller that controls the pellet flow.
This information helps the controller determine if more pellets are needed to maintain the desired cooking temperature in the cooking chamber. When the error code displays, this is a sign that the temperature probe is not working properly and needs to be repaired or replaced.
Typically, this issue is caused by dust, grease, or ash that has built up on the temperature probe. Regular cleaning can help prevent this issue from happening.
Some people find that this problem disappears after cleaning the sensor. Others may need to replace the sensor.
If the issue persists, it’s best to call customer support. They’ll be able to tell you what to do and help you fix your Pit Boss smoker.
In the case of a Pit Boss smoker, this means that the temperature probe is not connected correctly to the control board. If this happens, the Err code will appear on the screen and your Pit Boss will stop working.
How to Fix Pit boss Err code?
If you are seeing an error code on your pit boss indicating the unit is not working properly, it can be quite frustrating. But several things can be done to fix the issue and avoid it from coming back again.
Getting the right information about the problem can be the best way to solve it. There are some helpful guides online that can help you get the information that you need quickly.
One of the most common problems that pit boss pellet smokers have is a temperature probe problem. This issue occurs when the sensor in the smoker gets dirty due to grease and dust accumulation over time.
Once this happens, the probe can stop communicating with the control board. This can lead to the ErR and ErH error codes that you see on your pit boss control panel display.
ErH Error Code
The ErH error code indicates a high temperature in the smoker. This may be caused by too much heat inside the cooking chamber. To fix this issue, you’ll need to check and see if there are any blockages in the vents or chimney of your pit boss smoker.
You should also reduce the temperature settings on your control panel so that your pit boss doesn’t get too hot while cooking. If this doesn’t work, it could be time to replace some parts like the fan motor or temperature probe.
ErR Error Code
The ErR error code indicates a low temperature in the smoker. This can happen if there is not enough pellet fuel being fed through to keep up with the desired cooking temperature set on your control panel. To fix this issue, you should first check the fuel hopper to make sure it is full of wood pellets and that the auger motor is working properly.
You may also need to increase the temperature setting on your control panel so that your pit boss smoker can get up to the desired cooking temperature quicker. If this doesn’t work, then replacing some parts like the fan motor or temperature probe might be necessary.
ErP Error Code
The ErP error code indicates a problem with the power supply. This could be caused by a loose or faulty connection between your smoker and its power source. To diagnose this issue, you’ll need to check all of the connections between your pit boss smoker and its power source.
If everything appears to be in order and the error code still persists, then it may be time to change some parts like the fan motor or temperature probe.
In conclusion, while diagnosing an Err Code on your Pit Boss smoker can seem daunting at first, most of these issues can actually be resolved fairly easily. Common causes include a dirty temperature probe or a problem with the power supply. Regular cleaning and maintenance are essential for any pellet smoker in order to keep it in optimal working condition.
Additionally, if you are having any trouble diagnosing and fixing the pit boss err code yourself, don’t hesitate to reach out to customer support for further assistance. They will be able to provide more detailed instructions on how to fix your Pit Boss smoker. With a bit of patience and knowledge, you can quickly get back to cooking delicious meals for your family!
If you see this error code frequently on your pit boss, it could be because you haven’t turned the grill off properly before shutting it down. You can try turning the grill off and letting it go through a shutdown cycle for a few minutes to see if that clears the error code.
Conclusion
We hope these troubleshooting tips will help you get your Pit Boss smoker up and running again in no time! If you need any more help or advice with your Pit Boss, don’t hesitate to contact a certified technician for further assistance. With just a few simple steps, you’ll be back in business and enjoying delicious BBQ soon!
In any case, getting advice from an expert at Pit Boss customer service can help you diagnose and fix any issues with your smoker quickly and easily. They have years of experience dealing with all kinds of problems related to pellet smokers and grills.
Leave a Reply